최신 Huawei-certification H12-841_V1.5 무료샘플문제:
1. In Huawei's SD-WAN solution, when branch equipment is deployed using "Zero-Provisioning (ZTP)," which of the following is the first step?
A) Copy the configuration file to the device using a USB flash drive.
B) Manually configure the device IP address on-site.
C) Manually log in to the device command-line interface to initialize configuration.
D) The device automatically obtains its IP address and management platform address after power-on.
2. In an MPLS VPN network, which type of device is responsible for "connecting the customer network and the operator's backbone network to achieve VPN route access and forwarding"?
A) PE device (Provider Edge)
B) CE Equipment (Customer Edge)
C) P device (Provider)
D) Core Router
3. In a WAN BGP protocol deployment, if it is necessary to " reject receiving routes to a specific network segment advertised by a neighbor (such as (192.168.10.0/24)"), which of the following filtering policies should be configured?
A) Enable BGP route aggregation
B) Configure BGP neighbor MD5 authentication
C) Adjust BGP Local Preference properties
D) Use a prefix-list to reject the network segment in the BGP neighbor inbound direction.
4. In MPLS VPN network troubleshooting, if it is necessary to "view the ARP table of the VPN instance on the PE device to confirm whether the CE device's MAC address is being learned normally", which of the following commands should be used?
A) display bgp vpnv4 all routes
B) display arp VPN instance [instance name]
C) Display IP routing-table VPN instance [instance name]
D) display mpls lsp
5. In the OSPF protocol for wide area networks, what is the main difference between an "NSSA area" and a "normal Stub area"?
A) NSSA areas only receive Type 1/2 LSAs, while regular Stub areas receive Type 1/2/3 LSAs.
B) The NSSA region is no different from a regular Stub region; only the configuration commands differ.
C) NSSA areas allow the introduction of external routes from the AS (Type 7 LSA), while regular Stub areas do not.
D) NSSA areas do not receive Type 3 LSA, while regular Stub areas do.
질문과 대답:
| 질문 # 1 정답: D | 질문 # 2 정답: A | 질문 # 3 정답: D | 질문 # 4 정답: B | 질문 # 5 정답: C |
1098 개 고객 리뷰
품질과 가치ITCertKR 의 높은 정확도를 보장하는 최고품질의 덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.
테스트 및 승인ITCertKR 의 덤프는 모두 엘리트한 전문가들이 실제시험문제를 분석하여 답을 작성한 만큼 시험문제의 적중률은 아주 높습니다.
쉽게 시험패스ITCertKR의 테스트 엔진을 사용하여 시험을 준비한다는것은 첫 번째 시도에서 인증시험 패스성공을 의미합니다.
주문하기전 체험ITCertKR의 각 제품은 무료 데모를 제공합니다. 구입하기로 결정하기 전에 덤프샘플문제로 덤프품질과 실용성을 검증할수 있습니다.
