최신 SNIA SCSA S10-201 무료샘플문제:
1. Click the Exhibit button.
You are troubleshooting an issue with Host 1 that should see newly installed storage devices A and B, however can only see Storage A and not Storage B.
Which two (2) items should you check? (Choose two.)
A) if Storage A is logged into the switch
B) if Host 1 is logged into the switch
C) if Storage B is logged into the switch
D) connectivity of the ISL between the two switches
E) if Host 1 is zoned to Storage B
2. You are trying to upgrade an existing 1Gb/s FC SAN that is using 62.5 micron multi-mode cable from a tape library to a server that is 175 meters away to 2Gb/s Fibre Channel. After switching to the 2Gb/s Fibre Channel equipment, a connection to the server cannot be maintained. When a connection is made, numerous errors are reported. What is the cause of the errors?
A) 2Gb/s Fibre Channel must convert to LC from SC connectors
B) 2Gb/s Fibre Channel cable length has been exceeded
C) 2Gb/s Fibre Channel cable length requires an optical splitter
D) 2Gb/s Fibre Channel must use 50 micron multi-mode cable
3. Two servers have been connected to a SAN with redundant fabrics and the zone configuration needs to be changed. How can you safely change the zone configuration?
A) Modify the zone configuration on both fabrics at the same time, enable them simultaneously to avoid segmentation.
B) Save the current zone configuration to disk, modify it and apply it to both fabrics simultaneously to avoid segmentation.
C) Modify the zone configuration on one fabric, test it, and then modify the zone configuration on the second fabric.
D) Modify the zone configuration on one fabric, test it, and then copy the zone configuration to the second fabric.
4. A HBA has failed in an application server that connects to a Fabric that uses WWPN zoning. Which two (2) steps should be completed after replacing the HBA to bring the application server back online? (Choose two.)
A) Change the application metadata server.
B) Change the WWPN login of the HBA.
C) Change the zone configuration.
D) Change the LUN masking configuration.
5. A four-way cluster is attached to two fabrics. Each member has two HBAs connected to each fabric. Each fabric has two subsystem connections. Each cluster member is a primary for one application. All LUNs appear on all storage ports with workload equally distributed across all. Each host has two dedicated HBAs for tape that can each see four independent LTO II (35MB/s) tape drives. All files are large and involve sequential I/O. Performance reporting shows a large read pending at the host during multi-threaded backup. What is the most probably cause for the large read pending at the host?
A) SCSI Queue Depth too high
B) throttling threshold is too high
C) SCSI Queue Depth too low
D) native command queuing
질문과 대답:
| 질문 # 1 정답: C,E | 질문 # 2 정답: B | 질문 # 3 정답: C | 질문 # 4 정답: C,D | 질문 # 5 정답: C |
1024 개 고객 리뷰
품질과 가치ITCertKR 의 높은 정확도를 보장하는 최고품질의 덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.
테스트 및 승인ITCertKR 의 덤프는 모두 엘리트한 전문가들이 실제시험문제를 분석하여 답을 작성한 만큼 시험문제의 적중률은 아주 높습니다.
쉽게 시험패스ITCertKR의 테스트 엔진을 사용하여 시험을 준비한다는것은 첫 번째 시도에서 인증시험 패스성공을 의미합니다.
주문하기전 체험ITCertKR의 각 제품은 무료 데모를 제공합니다. 구입하기로 결정하기 전에 덤프샘플문제로 덤프품질과 실용성을 검증할수 있습니다.
